Really pleased on how the driveway has turned out. I would like to thank you for your advice, both before, and when deciding what materials to purchase. Also your help during the proces when you were on the end of the phone advising me.
Bryan Shepherd - Westhoughton, Bolton
Overview
Smartseal Imprinted Concrete sealer has been developed to give pattern imprinted concrete a silky rich finish.
- Gives Imprinted Concrete superb long term protection
- Easy to apply by sprayer or broom
- Resists oil and stain penetration
- BS5750/ISO9000 quality approved Imprinted Concrete Sealer
- Protects against colour loss and surface wear
- Will not blister or peel, hardens & seals concrete permanently
- Enhances the colour of the paving
- Tough, Durable and Hard Wearing
- Oil & Grease resistant
Approximate Coverage
3 to 5m2 per litre per coat (dependent on condition)
Technical Information
Application
Brush slab to remove any dirt or debris. Smartseal Imprinted Concrete Sealer must applied with a sprayer unit or roller, keeping sprayer head moving to avoid pooling. The first application must be brushed into the surface and allowed to dry past tacky prior to applying the second coat. Avoid application in strong, direct sunlight - do not apply if rain is likely within 3 hours of application.
Deicing salts should not be applied directly on Smartseal block paving or concrete sealers. Salt chemically reduces the temperature at which water freezes and will result in water ingress into the concrete. Subsequent freezing may result in the concrete ‘seal’ being broken by the expansion of water as it freezes and white ‘pitted’ areas may become visible.
Technical & Test Data
Smartseal Imprinted Concrete Sealer has been tested by the TRL (Transport Research Laboratory) and certified that it meets the SRV (Skid Resistance Value) for all categories of paving for local authority pedestrian areas and when heavily trafficked is suitable for special applications where risks of skidding are high as laid down in the UK Highway Authorities Tender Specification. Copies available on request.
Health & Safety
Flammable liquid. Do not smoke. Keep application area well ventilated. Wear respirator when applying. Store in a cool place. Flash point 42°C (Abel-Closed Cup). Refer to the Health & Safety Data Sheet for further information.