Sealer Repair Fluid (25 litre)

Overview

Smartseal Sealer Repair Fluid will rejuvanate existing imprinted concrete sealer and clear surface whiteness.

Technical Information

Sealer repair fluid is a xylene product designed to repair incorrectly applied sealer which is lifting or sealer which has reacted with moisture during the drying process. For imprinted concrete it should be liberally applied to the affected area, left for a couple of minutes and then worked into the surface with a soft broom. This will 'soften' the sealer and allow it to re-bond to the concrete.

 For removal of surface whiteness to imprinted concrete or block paving repeat as instructions above, but with block paving be careful not to disturb the jointing sand when working the sealer repair fluid into the surface of the blocks. 

Health & Safety

Flammable liquid. Do not smoke. Keep application area well ventilated. Wear respirator, gloves and safety glasses when applying. Store in a cool place. Flash point 42°C (Abel-Closed Cup). Refer to the Health & Safety Data Sheet for further information.

Customer Reviews

I had spilt brake fluid on my drive, leaving an ugly white stain that nothing would shift. One application of this stuff and it vanished completely. Talk about does what it says on the tin!

By: Mick       From: Nottingham