Travertine Tile Sealer - Enhanced Finish (Available in 1 & 5 litre)
There are currently no reviews for this product.
Be the first to write a review.
Ask Us A Question
Smartseal Travertine Sealer is a high quality, clear, solvent free acrylic impregnating coating system. Application of the sealer will alter the chemical structure of the granite or natural stone providing a excellent water repellent and stain resistant surface.
One coat application
1 x 5 litre will treat up to 60 m2
Highly resistant to algae, lichen and staining
Will leave surface 'damp' or 'wet' looking dependent on porosity of surface
Average coverage 10 m2 per litre
Application by cloth, roller or sprayer
Touch dry 2-3 hours
Fully waterproof 24 hours
Lifespan of approx. 5 years can be expected
Suitable for Travertine externally or internally
PREPARATION: Prior to application of travertine sealer or natural stone sealer ensure surfaces to be sealed are clean, dry and free from contamination. If algae or stains are present pre-treat prior to cleaning with a appropriate cleaning product.
APPLICATION: A suitable pressure sprayer or roller is recommended taking care to
avoid any pooling. Application on vertical surfaces should be to full saturation commencing at the bottom and working upwards. For internal surfaces application by a suitable cloth is appropriate. remove any excess after 20/30 minutes.
One application is normally required, do not apply in damp conditions at temperatures below 5°C. Shake container well before use.
All equipment should be cleaned with water immediately after use.
Finish may vary according to the type of stone applied to
Always apply to a test area first
SHELF LIFE: Store away from direct sunlight and sources of heat. Protect from frost.
12 months (in original sealed container).