Grout Magic - (237ml & 5ml sample sizes) - LIGHT GREY grout restorer & sealer to recolour grout.
Frequently Asked Questions
GREY GROUT SEALER & GROUT COLOURANT. GROUT RESTORER FOR WALLS & FLOORS
Grout Magic is a light grey grout paint that works like a grout dye and superior to a cheap grout pen. The light grey grout paint can restore the colouring of wall and floor grouting. Grout Magic is also a grout sealer that works much better than a grout pen. You can use Grout Magic to totally change the colour of wall or floor grout.
Before using Grout Magic make sure you use the Grout Cleaner to clean the grout. For best results we also suggest using the Grout Magic Pre-Treatment to make sure the grout joints are clean. If cement or grout residue is found on the tiles use the Grout Haze Remover prior to using the grout paint. Apply the Mould and Mildew Remover as well to help prevent any health issues from mould and mildew growth.
How does Grout Magic work?
Grout Magic in LIGHT GREY is a powerful grout dye that is used to change the colour of old tile grout. Available in 10 colours, it will renew and transform the look of old tile grout. This superior LIGHT GREY grout sealer will absorb and penetrate deeply into existing grout on walls and floor tiles. It can give a totally new look to dramatically enhance the appearance of any wall or floor tile installation.
Once completely dry and fully cured, Grout Magic in LIGHT GREY will provide a durable protective seal to the grouting. As a grout cleaner the grout stain will also help to reduce the growth and spread of mould and mildew on floor and wall tiles.
Also works as an effective grout stain remover
Grout Magic also acts as a grout sealer, forming a protective barrier against staining. It can be very difficult to remove grout stains that may have appeared over time. There is no need to accept the situation if wall or floor grouting is stained. Superior to a grout pen, Grout Magic in LIGHT GREY can transform the look of the grouting very quickly and easily.
The light grey grout paint is easy to apply and no DIY skills are required, just common sense. The speedy and simple application process permanently seals and adds colour to make it look like new. It is used frequently by professional tradesmen and homeowners.
- RE-COLOURS AND SEALS GROUT IN ONE GO
- MAKES OLD GROUT LOOK LIKE NEW
- HIDES GROUT STAINS
- VARIOUS COLOUR OPTIONS
- FOR INTERNAL USE ONLY
*10 GROUT COLOUR OPTIONS AVAILABLE
The grout dye and grout restorer comes in Black, Charcoal, White, Light Grey, Mid Grey, Light Brown, Dark Brown, Ivory, Sandstone & Limestone.
237 ml bottle
Coverage rate will vary from 3 - 15mē per 237ml bottle. Coverage rate of Grout Magic will vary considerably depending on the width of the grouted joint as well as its density, texture and surface porosity.
- Ensure the area to be treated with Grout Magic is clean and completely dry prior to application
- For best results and before application, use Grout Magic Pre-Treatment
- Shake the bottle vigorously before use.
- Apply in a thin coat over the grouted joint using a brush or sponge and apply evenly over the surface.
- Wipe off any excess that is on the tile surface straight away or within 60 minutes of application.
- To ensure best results two coats should be applied allowing 1-2 hours drying time for each coat.
- Do not wet the area for a further 48 hours.
NOTE: When using more than one bottle of the same colour of Grout Magic, mix all the product together to ensure an even colour match and consistency of finish.
We do not recommend using Grout Magic around porous surfaces i.e. unglazed tiles and porous natural stone surfaces as it could result in long term staining.
PLEASE NOTE: If application guidelines are not adhered to above and the product is applied too thickly onto the joint it could result in surface blistering, cracking and de-bonding of the product.