0
Payment Methods Accepted
Buy with confidence

Oil Stain Remover for Block Paving and Concrete

£18.95
inc VAT
StarStarStarStarStar 7 Reviews|(5/5)
Size
Direct from Supplier Direct from Supplier

Customer Reviews

I'm sure this product is brilliant for removing oil, petrol stains etc but it does not work on "Danish/Teak Wood Oil" that had inadvertently dripped and stained my stone slabs!!! Back to the drawing board to try and remove the spots.

StarStarStarStarStar
By Bryan Oram From

did exactly what its meant to on a heavy oil stain on cobbles. trick is to follow the instructions and leave it to work for 24hours at lease

StarStarStarStarStar
By Richard Hodge From

Absolutely brilliant. It removed an old oil stain from my concrete drive within 24 hours. This was recommended by a friend and I would have no hesitation in recommending it to others. The product arrived in 3 days from ordering, counting a weekend. Wonderful service. What a great company.

StarStarStarStarStar
By Patrick Houlden From Suffolk

Had an OMG moment when I spilt oil over my drive and my neighbours......Bought this product and it was brilliant, the block paving is as good as new. I would highly recommend this product. easy to use, even smelt quite nice and works a treat !

StarStarStarStarStar
By Jen Judd From Bedfordshire

An excellent product which did what it said it would do.Very surprised how quickly the product was in arriving. Would certainly recommend this company

StarStarStarStarStar
By John Parker From Timberman1@tiscali.co.uk

I used this on a oil stain which was completely black & had been there for at least 2years you can no longer see where the stain was & i used surprisingly very little of the product!

StarStarStarStarStar
By Ian From WESSEX PRO SEAL

Just cleaned a job for a local garage who forgot to do up a cars sump plug. So 5lrs of oil went all over block driveway and tarmac. Results are great, can't see any marks on block driveway. Left it on for 1 week - magic. Tried other cleaners which made no impact whatsoever

StarStarStarStarStar
By Patrick Oliver From Brilliant Driveway Cleaners
Read more reviews

Leave A Review

Product Rating  *  *  *  *  *

*All submissions will be checked by our administration team before appearing on the site. Please be patient as we will try and approve your comments as quickly as possible.

Description

Oil Remover to remove oil stains on Block Paving and Concrete surfaces.

A new bio-degradable approach to the removal of most oil stains* from block paving and concrete. This biological oil stain remover removes and digests oil stains from floors, road surfaces, forecourts, driveways and equipment.

*NOT FOR USE ON SYNTHETIC OIL SPILLS

KEY PROPERTIES

Penetrates and lifts oil stains from even the most porous surface.
Contains a blend of biological enzymes and bacteria to digest oil stains to completion.

  • Biological
  • Biodegradable 

APPROVALS

  • German UBA (3406-0001)
  • Separator Friendly
  • UK Environmental Agency report on the bacteria used in this product
    − Environmentally acceptable chemical.
    − Meets pr EN 858
    − Full report.
    − Summary report. 

APPLICATION

With an application rate of approximately 1 litre per square metre, Smartseal Oil Remover is simple to use and lifts oil stains from the most porous surfaces.

  • Shake container before use (to put bacteria into suspension).
  • Water wet the oil stain before applying Smartseal Oil Remover.
  • Brush into the stain until the colour changes from white to brown.
  • Apply neat to the oil stain, brush in and leave for minimum 1 hour.
    For bad or old stains, apply product and cover affected area for a few days prior to removal.
  • Water rinse to remove residue and if required absorbent powder to prevent oil spills to surface drains.
  • Sweep up and dispose of residue according to local regulations.
  • A second application may be required on porous surfaces as the biological activity in the oil remover brings ingrained oil to the surface.

*Not suitable for synthetic oil stains or oil spillages on Tarmac − Use Oil Remover (Tarmac & Asphalt).

TECHNICAL DATA
Appearance Opaque white liquid Bacteria Count 2.0 × 107 cfu/ml
SG 0.96    

SAFE HANDLING AND STORAGE
Store in original containers and avoid extremes of temperature.

Technical

Key Properties

  • Penetrates and lifts most types of oil stains* from even the most porous paving surface.
  • Contains a blend of biological enzymes and bacteria to digest oil stains to completion.
  • Biological &  Biodegradable

*NOT FOR USE ON SYNTHETIC OIL SPILLS

Approvals

  • German UBA (3406-0001)  − Environmentally acceptable chemical.
  • Separator Friendly − Meets pr EN 858
  • UK Environmental Agency report on the bacteria used in this product

Application

With an application rate of approximately 1 litre per square metre, Smartseal Oil Remover is simple to use and lifts most oil stains from the most porous surfaces.

  • Shake container before use (to put bacteria into suspension).
  • Water wet the oil stain before applying SMARTSEAL OIL REMOVER 
  • Brush into the stain until SMARTSEAL OIL REMOVER changes colour from white to brown. Leave for 20 minutes and water rinse.
  • A second application may be required on porous surfaces as the biological activity in the product brings ingrained oil to the surface.

Not suitable for oil stains on Tarmac.

Safe Handling & Storage

Store in original containers and avoid extremes of temperature.

 
×