25 litres of Smartseal Sealer arrived fine last week. Did the job on Sunday, and it all went very well. Satisfied customer.
Phil Cork, Cheltenham, Gloucestershire
Overview
Smartseal Concrete sealer has been developed to give concrete long term protection.
- Gives Concrete superb long term protection
- Easy to apply concrete sealer by sprayer or roller
- Resists oil and stain penetration
- BS5750/ISO9000 quality approved concrete sealer
- Reduces efflorescence
- Will not blister or peel, hardens & seals concrete permanently
- Enhances the finish of the surface
- Tough, Durable and Hard Wearing
- Oil & Grease resistant
Approximate Coverage
3 to 4m2 per litre per coat
Technical Information
Application
Brush or power wash concrete to remove any dirt or debris, only apply when surface is totally dry. Smartseal Concrete Sealer is best applied with a sprayer unit or roller, keeping sprayer head moving to avoid pooling. The first application must be applied to the surface and allowed to dry past tacky prior to applying the second coat. Avoid application in strong, direct sunlight - do not apply if rain is likely within 3 hours of application.
Technical & Test Data
Smartseal Imprinted Sealer has been tested by the TRL (Transport Research Laboratory) and certified that it meets the SRV (Skid Resistance Value) for all categories of paving for local authority pedestrian areas and when heavily trafficked is suitable for special applications where risks of skidding are high as laid down in the UK Highway Authorities Tender Specification. Copies available on request.
Health & Safety
Flammable liquid. Do not smoke. Keep application area well ventilated. Wear respirator when applying. Store in a cool place. Flash point 42°C (Abel-Closed Cup). Refer to the Health & Safety Data Sheet for further information.