The broom did the job, but I think it could be better quality. There was loose bristles dried up on the concrete after applying the sealer onto the surface. Apart from this the broom gets well into the imprinted concrete. My driveway looks nice now. Thanks again.
The broom was the right tool for the job although I did try to brush it first to remove the loose bristles but some still came out when I was applying the sealer
Fast delivery, good quality product used to apply sealant to a concrete drive.
Imprinted Concrete Sealing Broom for Driveways and Patios 10" soft broom for sealing pattern imprinted concrete (supplied with handle). Allows application of sealer directly from drum. Prior to use pull on broom hairs and work over hard surface to remove any loose ones. Can be re-used at anytime in future, allow to dry naturally, broom hairs will harden once dry. Prior to re-use submerge in sealer for 10 minutes, hairs will soften, allowing re-usage.
*See technical section below for full instructions and tips prior to use.
Imprinted Concrete Sealing Broom for Driveways and Patios
10" soft broom for sealing pattern imprinted concrete (supplied with handle). Allows application of sealer directly from drum.
Prior to use pull on broom hairs and work over hard surface to remove any loose ones.
Can be re-used at anytime in future, allow to dry naturally, broom hairs will harden once dry.
Prior to re-use submerge in sealer for 10 minutes, hairs will soften, allowing re-usage.
Once purchased, you will only require one sealing broom, but 1st time it is used, often like any natural hair broom, it will shed hair.
Application by plastic hair broom or roller is not advised, use of roller will tend to leave excess sealer in the joints, which can create problems.
Please follow instructions below prior to use.
1. Prior to using rub broom head on abrasive surface and pull out loose hairs.
2. During use, if you are using Colour Tint or Anti Slip Additive, stir reguarly and let broom 'hit' bottom of drum, to keep additives suspended.
3. After use, do not attempt to clean broom, just leave to dry.
4. When you are ready to use broom again, whether it is 1 day, 3 months or 5 years, just leave immersed in sealer for 5 minutes, it will soften up again and be ready for use.
It is that simple, the broom works great for applying imprinted concrete sealer, enabling you to use the product sparingly and not leaving any excess in the joints.
In summary, your sealing broom will literally last forever, you just need to get rid of any loose hairs, prior to use. If a few hairs still get stuck in the surface, do not worry, they will soon be released as the initial 'tackiness' of the sealer diminishes.
We provide a national delivery service for our block paving sealer, pattern imprinted concrete sealer, roof coatings and tarmac restorer on a standard 2 - 4 working day basis. Dependent on weight, this is normally done by pallet or parcel carrier.
If you need products delivered quicker, for a small additional charge, orders placed before 1.30pm can be delivered within 1 - 2 working days to most parts of the UK, although this is dependent on the courier service in your area and the product/s ordered. If you require this service, please check on area availability by calling 01268 722500.
Our commitment is to supply all orders as placed and we offer a comprehensive guarantee of quality. Providing a reliable delivery service to all our customers is most important to us and this is backed up by the many satisfied customer testimonials we have received over the years.
If you need an order delivered to a different address, left somewhere at your property without a signature or left with a neighbour, just let us know.
We also try to maintain 100% stocking levels of our products at all times, so an immediate despatch is virtually guaranteed.
Our product returns policy can be viewed by visiting our Terms and Conditions section.
*Free delivery on orders over Â£75 are subject to the delivery address location.