Smartseal's Premium Paint & Varnish Stripper is a High Performance Paint Stripper for the removal of multiple layers of Paint, Varnish & Lacquer. The Heavy Duty Paint & Varnish Stripper is suited for both internal & external use, removing the above finishes from Concrete, Masonry, Brick, Metal & Wood.
Benefits:
- Easy to Use
- Non-Corrosive
- Water Based
- Biodegradable
- Low VOC
The Smartseal Premium Paint & Varnish Stripper is a Powerful, Ready to use, Fast Acting solution to your Paint & Varnish stripping needs.
For Plastics and painted/coated finishes, test on a small area first to determine suitability. On porous substrates work in with a stiff brush or for smooth surfaces, use a cloth/sponge pad. Wash off with water or pressure washer. Repeat the steps if necessary for heavy or aged surfaces.
APPLICATION
Ready to use and should not be diluted. Ensure the surface is completely dry before application. Cover container lid with a cloth during opening to avoid splashes. Layer a generous, even coat onto the surface using a clean brush or airless spray (rollers can be used for light coatings) DO NOT BRUSH OUT Leave for the recommended timing dependant on the stripping guide and apply a second generous coat. (On less than five layers of Paint or Varnish, a second coat may not be necessary). After the product has penetrated the substrate (up to 24 hours) scrape off with suitable scrapers, leaving surface as clean as possible. Rinse clean with cold water containing detergent and a stainless steel scourer, leave to dry. Never use steel wool, stainless steel only.
Guide to Stripping Times
- Graffiti: 5 minutes - 2 Hours
- Varnish: 10 - 30 minutes
- Sealer: 15 - 90 minutes
- Paint: 5 - 30 minutes
- Two pack varnish: 15 - 90 minutes
- Heavy multi-layered paint: 45 minutes - 12 hours
- Two pack lacquer: 15 minutes - 12 Hours
- Artex: 30 minutes - 2 Hours
RECOMMENDATIONS:
Store sealed in a cool place away from direct sunlight. Once opened, use entire contents as soon as possible.
Do not apply to Damp Surfaces or at temperatures below 7°C.
APPLICATION:
Application by sprayer, roller or brush - do not allow to dry.
HEALTH & SAFETY:
Wear appropriate safety wear at all times. Technical data sheets and additional technical information is available upon request.
We provide a national delivery service for our block paving sealer, pattern imprinted concrete sealer, roof coatings and tarmac restorer on a standard 2 - 4 working day basis. Dependent on weight, this is normally done by pallet or parcel carrier.
If you need products delivered quicker, for a small additional charge, orders placed before 1.30pm can be delivered within 1 - 2 working days to most parts of the UK, although this is dependent on the courier service in your area and the product/s ordered. If you require this service, please check on area availability by calling 01268 722500.
Our commitment is to supply all orders as placed and we offer a comprehensive guarantee of quality. Providing a reliable delivery service to all our customers is most important to us and this is backed up by the many satisfied customer testimonials we have received over the years.
If you need an order delivered to a different address, left somewhere at your property without a signature or left with a neighbour, just let us know.
We also try to maintain 100% stocking levels of our products at all times, so an immediate despatch is virtually guaranteed.
Our product returns policy can be viewed by visiting our Terms and Conditions section.
*Free delivery on orders over £75 are subject to the delivery address location.