Sealer Colour Tints for Imprinted Concrete Sealer (500g or 30g sample)
Highly Concentrated Powder Pigment - Use Sparingly. For use with Imprinted Concrete Sealers (20 colours)
Colour Tints to restore original colour to Imprinted Concrete surfaces.
Add sparingly directly to sealer, until desired colour is achieved (always apply on a small test area first). Agitate regularly during application.
Only recommended to be used in combination with Smartseal MATT finish sealer.
WARNING: Unnecessary use, or too much colour added to sealer can cause peeling or flaking.
Only use with solvent based imprinted concrete sealer to bring back original colouring of driveway or patio.
Colours Available
Q: Hello there. Several risers on the exterior concrete steps to the front door have broken down, crumbled due to rain and frost. Unfortunately, we couldn't get anyone to repair them. Seemingly, it's too small a job. Anyway, we've repaired them ourselves. Although not a professional job, they don't look too bad. I'm going to give them a light sanding to tidy the finish up a bit, and then apply some kind of weatherseal. To give the cement a better/more even finish, I'm thinking of using a grey tint in the sealer? Would your product be good for this job? Is it suitable for use on steps? Should I simply ensure that it's either water or solvent based, depending on the sealer? Thanks in advance, Linda
A: The grey Sealer Colour Tint should be OK to mix with the cement and sealer to create a more even finish. Samples are available to test.
Q: Hi have brought your sealer colour tints ( have 3 colours as previous pattern was 3 and i liked it but has badly faded) is it ok to mix with the wet look sealer to paint on or is the wet look sealer just for top sealing coat, only asking as i have only purchased the silk/wet look sealer to go with the colours. Thank you
A: If you are using a small amount of colour tint, then it should be OK to use with the SILK Imprinted Concrete Sealer you have purchased. If you are intending to use a lot of colour tint in the sealer, then the MATT Imprinted Concrete Sealer would be best to use.
Q: Good evening, we are looking to reseal our concrete pavement, which is currently a sandstone like colour. We would like to turn it into a grey driveway. Could you please put the shades of grey in order from darkest to lightest ? Many thanks
A: In the Sealer Colour Tints for Imprinted Concrete the order from darkest to lightest would be Charcoal, Slate grey, Steel Grey, Platinum Grey then Silver grey.
We provide a national delivery service for our block paving sealer, pattern imprinted concrete sealer, roof coatings and tarmac restorer on a standard 2 - 4 working day basis. Dependent on weight, this is normally done by pallet or parcel carrier.
If you need products delivered quicker, for a small additional charge, orders placed before 1.30pm can be delivered within 1 - 2 working days to most parts of the UK, although this is dependent on the courier service in your area and the product/s ordered. If you require this service, please check on area availability by calling 01268 722500.
Our commitment is to supply all orders as placed and we offer a comprehensive guarantee of quality. Providing a reliable delivery service to all our customers is most important to us and this is backed up by the many satisfied customer testimonials we have received over the years.
If you need an order delivered to a different address, left somewhere at your property without a signature or left with a neighbour, just let us know.
We also try to maintain 100% stocking levels of our products at all times, so an immediate despatch is virtually guaranteed.
Our product returns policy can be viewed by visiting our Terms and Conditions section.
*Free delivery on orders over £75 are subject to the delivery address location.
Good product easy to use when mixed with imprinted concrete sealer no problem to apply would recommend Smart seal products with no hesitation.
Used half a tub of colour to 25litre Matt for first coat, covered the faded concrete brilliantly, used say22litres on first coat, then topped up with about 15litres of sealer for second coat, over the moon with the result just got to. do top silk coat.
Colours the sealant nicely. You dont need much so I only used the 30g sample on my 2nd coat of approx 2 litres of sealant and it has worked well.