Free Delivery
On Orders Over 75*
#1 Top rated cleaning supplier
on trustpilot
UK Manufactured
since 2008
Product Reviews
By Karl Morris

Arrived quickly and the sealer has transformed the drive back to its almost as new condition after being left a bit too long with no maintenance. Used the silk sealer DIY kit and got two coats on the 60 square metre drive as well as the additional path ways out of one 25L bucket. Would use again next time. :)

By Christopher Vickery

easy to use & with superb results

By Michael HallFROM Leek

Excellent product, easy to follow video guides and questions answered promptly by the supplier. When a neighbours drive was being coated by a contractor, I asked for a quote - 2.3K!!! That was all the persuasion I needed to go to Smart Seal and do it myself - easy to apply, the drive looks far better with the advised 2 coats (rather than the single coat quoted for), the anti-slip is a good addition and I saved myself the best part of 2K. Result all around.

Wish to leave a review?
Write a review
Your Rating:
* All submissions will be checked by our administration team before appearing on the site. Please be patient as we will try and approve your comments as quickly as possible.

Imprinted Concrete Silk DIY Kits (3 size options)

Restore your Driveway or Patio with a 'like new' PROFESSIONAL finish (3 different sizes available) Includes SILK Sealer & All Materials Required for 2 coats of Sealer

In Stock
Visa Electron
Product Description

DIY Sealing Kits for Patterned Imprinted Concrete 

**If using Smartseal Colour Tints, please select MATT imprinted concrete sealer instead of Silk**

Restore your imprinted concrete driveway or patio with Smartseal

Our kits include everything you need for complete restoration of your pattern imprinted concrete. Just take some approx measurements and click on the relevant size of your driveway or patio in the drop down menu on the right hand side of this page.

We only recommend sealing your paving if it is clean from moss, weeds, dirt, stains and algae. If your surface is not in this condition and you are unable to clean it, just get in touch, we will then put one of our approved professional cleaning contractors in touch with you.

Call 01268 722 500 for any help and technical advice you may need prior to placing your order.

Our DIY sealing kits for Imprinted Concrete include...

  • Imprinted Concrete Sealer to cover your selected area with 2 coats
  • Sealing Broom
  • Vapour Mask
  • Protective Gloves
  • Protective Glasses
  • Anti-Slip Additive
Application Guidelines:
  1. Make sure that surface area is completely clean.
  2. Make sure that the surface area is bone dry (allow 2 dry days after cleaning)
  3. The Imprinted Concrete Sealer is commonly a 2 coat application, however due to age and condition of the surface, this may vary to get a 'uniform' finish. Please contact us providing pictures if unsure. Furthermore, samples are available to try on a test area.
  4. Apply sealer to the surface using a broom. (allow 1-2 hours minimum between coats).
  5. Allow 4 hours before walking and 24 hours before any vehicle traffic on the surface (for the sealer to cure and bond to the concrete).

PLEASE REFER to our YouTube Channel if unsure regarding the use of colour tint.

After correctly applying the sealer, expect to have between 3-5 years protection. Sealer protection will vary dependent on a number of factors such as: traffic (foot/vehicle), weather and general maintenance.

For more information on the Imprinted Concrete Sealer application; please visit the Smartseal YouTube playlists

Product FAQs

Q: Can I use the tint with silk seal on tiny spots of small chip marks on drive,and then cover again with full coat of silk on full drive.

Barry Pearce

A: If it is small chip marks. Yes. Due to its extra viscosity the 'silk' imprinted concrete sealer should not be used with colour. Hope that helps.

Response from Alex

Q: Can this be used on monoblock?

Julie Penman

A: It would be best to get in touch with our technical team online or over the phone, who will best be able to advise you.

Response from Ricky

Q: How much of an area does this cover ? Thank you


A: Dependent on the age, condition and how much sealer is still present. Coverage of the imprinted concrete sealer would generally be 4-6m2 per litre. Hope that helps.

Response from Nigel
Ask Us A Question
Send us a question

We provide a national delivery service for our block paving sealer, pattern imprinted concrete sealer, roof coatings and tarmac restorer on a standard 2 - 4 working day basis. Dependent on weight, this is normally done by pallet or parcel carrier.

If you need products delivered quicker, for a small additional charge, orders placed before 1.30pm can be delivered within 1 - 2 working days to most parts of the UK, although this is dependent on the courier service in your area and the product/s ordered. If you require this service, please check on area availability by calling 01268 722500.

Our commitment is to supply all orders as placed and we offer a comprehensive guarantee of quality. Providing a reliable delivery service to all our customers is most important to us and this is backed up by the many satisfied customer testimonials we have received over the years.

If you need an order delivered to a different address, left somewhere at your property without a signature or left with a neighbour, just let us know.

We also try to maintain 100% stocking levels of our products at all times, so an immediate despatch is virtually guaranteed.

Our product returns policy can be viewed by visiting our Terms and Conditions section.

*Free delivery on orders over £75 are subject to the delivery address location.

Share this product