Free Delivery
On Orders Over £75*
#1 Top rated cleaning supplier
on trustpilot
UK Manufactured
since 2008
Product Reviews
By A RahalFROM Bucks

Good block paving sealer, easy to apply and went further than i hoped.

By Barrie Sharrock

Easy to use sealer with no smell. Used on new pavioursand the slight colour change was an improvement. Job not yet finished on quite a large area and I'm not sure if I have ordered quite enough.

By Gurdip Sidhu

This sealer is fantastic my neighbour asked me to order for him as well. I will advise others to use this one.

READ MORE REVIEWS
Wish to leave a review?
Write a review
Your Rating:
* All submissions will be checked by our administration team before appearing on the site. Please be patient as we will try and approve your comments as quickly as possible.
Save up to 12.5% with multi-buy

Solvent Free Block Paving Sealer (Eco Friendly)

(100ml, 5L, 25L and Bundles Available) No Smell or Fumes. Seals, protects and solidifies jointing sand, leaving a Matt Finish. Applied via a watering can and a squeegee.

£34.95
In Stock
Multi-buy price:
Please select a size
Multi-buy
Buy 1
£34.95 each
Buy 2-3
£33.20 each
Buy 4-6
£32.33 each
Buy 7-9
£31.46 each
Buy 10+
£30.58 each
Paypal
Visa
Visa Electron
MasterCard
Maestro
Product Description

Solvent-Free and Eco-Friendly Block Paving Sealer to stop weeds growing in the joints of block paving. A water-based block paving sealer and weed inhibitor with no smell or fumes due to its solvent-free formulation.

Highly effective, easy to apply sand hardener and block paving sealer, will inhibit the growth of weeds and moss and protect blocks.

APPLICATION and PREPARATION GUIDE

  • Penetrates deep into sand
  • One or Two coat application (see coverage) 
  • Sets jointing sand solid
  • Restricts weed and moss growth
  • Easy to apply by watering can and squeegee
  • Manufactured to BS5750/ISO9001 standard
  • Gives additional protection to pavers
  • Stain and Oil resistant 

COVERAGE

For best results to allow product to penetrate approx 20mm into joints, apply at a ratio dependent on width of joints at 1.5 m2 per litre first coat, approx 4.0 m2 second coat

APPLICATIONS

Only suitable for use on standard concrete based block pavers - Not to be applied to clay pavers.

Technical

Block Paving Sealer (eco friendly) - See 'How To' Video Guide

Preparation: New Blocks Apply as soon as possible after installation. Remove excess sand. Apply above 12°C. Do not apply to wet surfaces, or if rain is forecast within 8 hours.

Older block paving: Thoroughly clean off the blocks with power wash, stain remover and fungicidal wash as necessary. Allow blocks to completely dry for 4-5 days before re-applying jointing sand until all joints are properly filled before application of Weed Inhibitor / Sand Hardener.

Application: By watering can or direct from container, apply liberally, working solution across surface with squeegee. Ensuring full absorption into depth of jointing sand.

Coverage:  Dependent on depth of pavers 1.5m² / 2m² per litre. Product will appear opaque when wet, but will be clear when dry. Ensure adequate supplies of product are available. Agitate drum before opening, keep sealed when not in use. Clean spillages with water. For best results, apply a 2nd coat within 3 hours, at a ratio of 4m² per litre.

Health and Safety:
Harmful by inhalation and if swallowed. Irritating to skin.
Wear appropriate safety wear at all times.

***NOT TO BE USED ON CLAY PAVERS

*** If your Block Paving has been previously sealed - to ensure compatibility, please Contact Us here before ordering.


Product FAQs

Q: How much product would I need for an area of approximately 110 sq metres?

James

A: Recommended coverage is 2m2 per litre,for 1 liberal coat, on this basis, we would suggest 60 litres. Hope that helps.

Response from Jacob

Q: Does this stuff come ready to go straight into the watering can etc please or do I add water if so what is the ratio 1/5 etc Thanks

J

A: The solvent free block paving sealer should not be diluted. Pour the contents into a watering can and apply without adding any water.

Response from Nick

Q: Will it seal concrete patio slabs?

Colin

A: The solvent free block block paving sealer is not suitable for sealing patio slabs. To seal concrete patio slabs we would recommend using the patio sealer.

Response from Nick
READ MORE QUESTIONS
Ask Us A Question
Send us a question
Delivery

We provide a national delivery service for our block paving sealer, pattern imprinted concrete sealer, roof coatings and tarmac restorer on a standard 2 - 4 working day basis. Dependent on weight, this is normally done by pallet or parcel carrier.

If you need products delivered quicker, for a small additional charge, orders placed before 1.30pm can be delivered within 1 - 2 working days to most parts of the UK, although this is dependent on the courier service in your area and the product/s ordered. If you require this service, please check on area availability by calling 01268 722500.

Our commitment is to supply all orders as placed and we offer a comprehensive guarantee of quality. Providing a reliable delivery service to all our customers is most important to us and this is backed up by the many satisfied customer testimonials we have received over the years.

If you need an order delivered to a different address, left somewhere at your property without a signature or left with a neighbour, just let us know.

We also try to maintain 100% stocking levels of our products at all times, so an immediate despatch is virtually guaranteed.

Our product returns policy can be viewed by visiting our Terms and Conditions section.

*Free delivery on orders over £75 are subject to the delivery address location.

Downloads
Share this product
 
COMPARISON BASKET COMPARE