Free Delivery
On Orders Over £75*
#1 Top rated cleaning supplier
on trustpilot
UK Manufactured
since 2008
Product Reviews
By J C

Happy with this sealant. Spreads easily and goes a long way. Lovely sheen on the imprint. Will definitely buy again.

By Anthony Dumican

The imprinted concrete sealant was easy to use and spread further than I anticipated. Made a remarkable difference to the look of the driveway. I definitely recommend it .

By Norma Dent

This is about the third time we have used this sealer. It does an excellent job and very pleased with outcome.

READ MORE REVIEWS
Wish to leave a review?
Write a review
Your Rating:
* All submissions will be checked by our administration team before appearing on the site. Please be patient as we will try and approve your comments as quickly as possible.
Save up to 12.49% with multi-buy

Imprinted Concrete Sealer SILK (Wet Look)

(Sample, 5 & 25 litre) - BEST SELLER - High Quality, Durable Concrete Sealer. Recommended if COLOUR Tint is NOT required. Our best-selling Imprinted Concrete Sealer

£39.95
In Stock
Multi-buy price:
Please select a size
Multi-buy
Buy 1
£39.95 each
Buy 2-3
£37.95 each
Buy 4-6
£36.95 each
Buy 7-9
£35.96 each
Buy 10+
£34.96 each
Paypal
Visa
Visa Electron
MasterCard
Maestro
Product Description

**If using Smartseal Colour Tints, please select MATT imprinted concrete sealer instead of Silk**

Silk Finish Imprinted Concrete Sealer for Driveways and Patios.

A 'satin' look hard wearing sealer for imprinted concrete surfaces

Smartseal Imprinted Concrete sealer has been developed to give pattern imprinted concrete a silky slightly 'wet-look' finish.

  • Gives Imprinted Concrete superb long term protection
  • Easy to apply by sprayer or broom
  • Resists oil and stain penetration
  • Make sure before applying that the surface temperature is between 10 - 20°C
  • Average coverage: 4 to 5 m² per litre per coat (dependent on condition)
  • BS5750/ISO9000 quality approved Imprinted Concrete Sealer
  • Protects against colour loss and surface wear
  • Will not blister or peel, hardens & seals concrete permanently
  • Enhances the colour of the paving
  • Tough, Durable and Hard Wearing
  • Oil & Grease resistant
Application Guidelines:
  1. Make sure that surface area is completely clean.
  2. Make sure that the surface area is bone dry (allow 3-4 dry days after cleaning)
  3. The Imprinted Concrete Sealer is commonly a 2 coat application, however due to age and condition of the surface, this may vary to get a 'uniform' finish. Please contact us providing pictures if unsure. Furthermore, samples are available to try on a test area.
  4. Apply sealer to the surface using a broom. (allow 2 hours minimum between coats).
  5. Allow 4 hours before walking and 24 hours before any vehicle traffic on the surface (for the sealer to cure and bond to the concrete).

PLEASE REFER to our YouTube Channel if unsure regarding the use of colour tint.

After correctly applying the sealer, expect to have between 3-5 years protection. Sealer protection will vary dependent on a number of factors such as: traffic (foot/vehicle), weather and general maintenance.

For more information on the Imprinted Concrete Sealer application; please visit the Smartseal YouTube playlists

Technical

Application

Brush slab to remove any dirt or debris. It is recommended that Smartseal Imprinted Concrete Sealer is applied with a Sealing Broom. The first application must be brushed into the surface whilst avoiding pooling, and allowed to dry past tacky prior to applying the second coat. Avoid application in strong, direct sunlight - do not apply if rain is likely within 8 hours of application.

Deicing salts should not be applied directly on Smartseal block paving or concrete sealers. Salt chemically reduces the temperature at which water freezes and will result in water ingress into the concrete. Subsequent freezing may result in the concrete seal being broken by the expansion of water as it freezes and white pitted areas may become visible.

**If using Smartseal Colour Tints, please select MATT imprinted concrete sealer instead of Silk**

Technical & Test Data

Smartseal Imprinted Concrete Sealer has been tested by the TRL (Transport Research Laboratory) and certified that it meets the SRV (Skid Resistance Value) for all categories of paving for local authority pedestrian areas and when heavily trafficked is suitable for special applications where risks of skidding are high as laid down in the UK Highway Authorities Tender Specification. Copies available on request.

Health & Safety

Flammable liquid. Do not smoke. Keep application area well ventilated. Wear respirator when applying. Store in a cool place. Flash point 42°C (Abel-Closed Cup). Refer to the Health & Safety Data Sheet for further information.

Product FAQs

Q: What is the shelf life / use by date of your imprinted concrete sealer? Just in case I don’t use it all this year. Thanks

Julian Vickers

A: We usually say use within 12 months of purchasing if unopened and stored away from heat or direct sunlight. However, we have known many customers use the product outside this time frame. If you open the sealer and it is clear then it should be OK to use but always do a small test first. If you open the sealer after storing for a long period and it has a 'cloudy' look to it this means it is contaminated and should not be used.

Response from Nick

Q: What is the shelf life / use by date of your imprinted concrete sealer? Just in case I don't use it all this year. Thanks

Julian Vickers

A: We usually say use within 12 months of purchasing if unopened and stored away from heat or direct sunlight. However, we have known many customers use the product outside this time frame. If you open the sealer and it is clear then it should be OK to use but always do a small test first. If you open the sealer after storing for a long period and it has a 'cloudy' look to it this means it is contaminated and should not be used.

Response from Nick

Q: wow much sealer do I need to cover 155 square metres of driveway???

stanley peschel

A: How much sealer you need will be dependent on the age and porosity of the surface. Whether 1 or 2 coats is required will also determine the amount of imprinted concrete sealer needed. For one coat you would need a minimum of 35 litres and for two coats 75 litres.

Response from Nick
READ MORE QUESTIONS
Ask Us A Question
Send us a question
Delivery

We provide a national delivery service for our block paving sealer, pattern imprinted concrete sealer, roof coatings and tarmac restorer on a standard 2 - 4 working day basis. Dependent on weight, this is normally done by pallet or parcel carrier.

If you need products delivered quicker, for a small additional charge, orders placed before 1.30pm can be delivered within 1 - 2 working days to most parts of the UK, although this is dependent on the courier service in your area and the product/s ordered. If you require this service, please check on area availability by calling 01268 722500.

Our commitment is to supply all orders as placed and we offer a comprehensive guarantee of quality. Providing a reliable delivery service to all our customers is most important to us and this is backed up by the many satisfied customer testimonials we have received over the years.

If you need an order delivered to a different address, left somewhere at your property without a signature or left with a neighbour, just let us know.

We also try to maintain 100% stocking levels of our products at all times, so an immediate despatch is virtually guaranteed.

Our product returns policy can be viewed by visiting our Terms and Conditions section.

*Free delivery on orders over £75 are subject to the delivery address location.

Share this product
 
COMPARISON BASKET COMPARE