Perfect solution for the new layer of sealant I put down
Sealed my imprinted drive last year with the Smartseal silk sealer product and it was a little slippy . Still had some sealant left over so decided to try the anti slip mixed into it this year and it has been very effective, giving it one more top coat, feels as described now with sandpaper feel. Very impressed with the service and products from Smartseal.
Anti-Slip Additive - Mix 1 x 500g to 25L of Sealer (keep stirring reguarly
Use with Solvent Based Sealers (keep stirring reguarly with broom during application). Add to sealer to increase the slip resistance of imprinted concrete surfaces
Anti-Slip Additive for Imprinted Concrete Sealer to make imprinted concrete surfaces less slippery.
Anti-slip additive is added to imprinted concrete sealer to increase the slip resistance of pattern imprinted concrete drives and patios.
Apply direct to sealer drum at a ratio of 1 tub to every 25litre drum, agitate with broom during application. Use of this additive will leave surface of concrete with texture of fine sandpaper, but once dry, the anti-slip additive is invisible to the naked eye.
Use of this product is always strongly recommended to reduce the slippery nature of imprinted concrete driveways and patios.
Only use on final coat of sealer, can be used in greater quantities for extra slippery areas. For further information or application advice please call 01268 722500
Q: Hi, I have a 95 m2 drive. How many packs of anti slip would I need. And does it go over impress Crete?. Regard Stephen Rayner
A: 1 x whole Anti-Slip is formulated to be used with a full 1 x 25L drum of Imprinted Concrete Sealer. If you're planning to do 2 coats (always recommended) you would only need one, as two 2 x25L drum would be sufficient to give you two coats. The 1st drum of sealer would be used clear or with colour, which should give you 1 coat. With the 2nd drum, you would add all the anti-slip, which would be enough to give you a 2nd and final coat.
Q: Does the anti slip additive have to be poured into the drum of sealer prior to use?
A: Yes, the Anti-Slip needs to be added to the sealer to create the sandpaper effect for grip. It's only mixed on the final coat at a 1:1 ratio (Example 100g per 5L).
Q: Once mixed with the sealer can this be sprayed on the concrete or does it need to be applied with a brush. Thanks
A: You wouldn't be able to spray the Imprinted Concrete Sealer with Anti-Slip. The Anti-Slip will make the sealer too thick to go through a sprayer.
We provide a national delivery service for our block paving sealer, pattern imprinted concrete sealer, roof coatings and tarmac restorer on a standard 2 - 4 working day basis. Dependent on weight, this is normally done by pallet or parcel carrier.
If you need products delivered quicker, for a small additional charge, orders placed before 1.30pm can be delivered within 1 - 2 working days to most parts of the UK, although this is dependent on the courier service in your area and the product/s ordered. If you require this service, please check on area availability by calling 01268 722500.
Our commitment is to supply all orders as placed and we offer a comprehensive guarantee of quality. Providing a reliable delivery service to all our customers is most important to us and this is backed up by the many satisfied customer testimonials we have received over the years.
If you need an order delivered to a different address, left somewhere at your property without a signature or left with a neighbour, just let us know.
We also try to maintain 100% stocking levels of our products at all times, so an immediate despatch is virtually guaranteed.
Our product returns policy can be viewed by visiting our Terms and Conditions section.
*Free delivery on orders over Â£75 are subject to the delivery address location.