Porcelain Sealer - One Coat - Stain & Scratch Resistant
Easy application, 100% breathable. Advanced, Nano-coating sealer. Safe, low-odour formula. Coverage: 10 - 20 m²/litre
Smartseal Porcelain Sealer is a hard wearing, breathable, protective coating for modern internal & external porcelain tiles. The porcelain tile sealer can also be used on ceramic wall and floor tiles. Furthermore, it helps to prevent general soiling & surface staining. Although this is not a cosmetic product, it does act as a colour enhancer and leaves a subtle wet look sheen once dry. However, its main purpose is to make cleaning and maintenance easier.
Smartseal Porcelain Sealer is a ready to use, easy to apply, quick-drying formulation that gives additional protection oil and water-based stains whilst enhancing the natural colours of the tiles. Once applied the porcelain tiles sealer will make cleaning and maintenance of porcelain surfaces much easier. WE DO NOT RECOMMENDED USING ON HIGHLY POLISHED SURFACES.
FEATURES
- Suitable for use on porcelain and ceramic tiles
- Strictly a single-coat application
- Leaves a subtle wet look sheen once dry
- Enhances the colours of the tiling
- Can be used externally on patios
- Also for use on walls and floors internally
- Ultra-durable sealer for long term protection
Formula is ready to use, quick drying and easy to apply.
Average coverage: 10 - 20m² per litre, dependant on surface texture and porosity.
Application temperature range: 10° to 23°C
Directions for Use:
Always apply to a test area or spare tile first.
Only apply to completely dry and clean surfaces.
**If applied to a surface where a "sweep-in" pointing compound has been used within the last 6 months, the porcelain must be fully cleaned with Smartseal Residue Remover prior to sealant application.**
Apply a single thin, consistent coat, with a microfibre cloth, microfibre flat mop or paint pad. Avoid application marks and excess pooling of sealer.
Please note:
This formulation is strictly a single coat application, because it is a high active micro coating that bonds very strongly to the impervious porcelain.
It is not a cosmetic product. Although it does make the treated surfaces look more attractive, its main purpose is to aid easier cleaning and maintenance.
Applying more than one coat to achieve the "desired appearance" will almost definitely result in application issues and product failure.
Given the above, it is important the exact application instructions are followed.
- Allow a minimum of 2 hours drying time before walking on. The sealer will be fully-cured and attain full water-resistance after 24 hours.
- If using externally, do not apply if rain is forecast within 8 hours.
- Average coverage 10-20m² per litre. Coverage will vary depending on surface texture and porosity.
- Store in cool, dry conditions out of direct sunlight in original container only. USE WITHIN 6 MONTHS OF PURCHASE & WITHIN 3 MONTHS ONCE OPENED.
Q: I have no slip porcelain tiles. Will this make them slippery when wet?
A: The Porcelain Sealer should really replicate what the surface already does prior to applying it. If it is non-slip then it should remain so after application and vice versa. However, as you have non-slip tiles it would be best to carry out a small test patch with a sample first to ensure the surface does not show a reduction in slip resistance.
Q: Hi I have porcelain floor tiles in my kitchen, but they are porous and stain easily. They are hard to keep clean. Would this sealer be good to use after I get them clean. Do you recommend any cleaner to use first?
A: The porcelain sealer can be used to help make it easier for you to clean the porcelain tiles. We would recommend using the porcelain tile cleaner first to clean the tiles prior to sealing.
Q: Is it ok to put on granite setts which I have as a border
A: Hello, please take a look at our natural stone sealer range. The porcelain sealer would not be suitable for this surface.
We provide a national delivery service for our block paving sealer, pattern imprinted concrete sealer, roof coatings and tarmac restorer on a standard 2 - 4 working day basis. Dependent on weight, this is normally done by pallet or parcel carrier.
If you need products delivered quicker, for a small additional charge, orders placed before 1.30pm can be delivered within 1 - 2 working days to most parts of the UK, although this is dependent on the courier service in your area and the product/s ordered. If you require this service, please check on area availability by calling 01268 722500.
Our commitment is to supply all orders as placed and we offer a comprehensive guarantee of quality. Providing a reliable delivery service to all our customers is most important to us and this is backed up by the many satisfied customer testimonials we have received over the years.
If you need an order delivered to a different address, left somewhere at your property without a signature or left with a neighbour, just let us know.
We also try to maintain 100% stocking levels of our products at all times, so an immediate despatch is virtually guaranteed.
Our product returns policy can be viewed by visiting our Terms and Conditions section.
*Free delivery on orders over £75 are subject to the delivery address location.
Only recently sealed, bit early to know if it really works but so far, so good. Delivery and customer service was excellent as I returned one bottle of porcelain sealer because I over ordered.
Excellent product
Have to say well impressed porcelain tiles seem to collect dirt because of the rough non slip face . Cleaned them then applied the porcelain sealer .Changed the appearance totally. Much better colour and any dirt just washes away ?