ROOF TILE SEALER - Dry 'Invisible' Finish - 10 yr+ Lifespan (sample, 5 & 25L)
Customer Reviews
Havent managed to use the roof sealer yet, but service from Smartseal second to none.
easy to use, did the job very happy
This product is best around. Can't fault it at all.
Excellent product. Roofs we have used this product on do not get wet and brings back the colour of the tile. Excellent product
Having continued to use this product I can honestly say it's by far the best out there. The roof stays dry in recent bad weather in the area. Brilliant product.
Used the sealer on a roof and I must say it's an awesome product. Customer is absolutely delighted. Will use anything else and also using drive dealers and will be ordering the masonry sealer. 5* product and customer service. Can't rate them high enough
'Does what it says on product description'. Easy to apply using fence sprayer. Have other side of roof to spray now but need to order some more. Great product
Roof tile sealer is a very good product used it on a clay roof and was very easy to applie and sealed the tiles to a very high standard!! Customer was very pleased, the help and advice from the guys back at the office was 100% helpfull very good product ! Very good support !!
HAVE A QUESTION?
Description
Clear Roof Sealer
Smartseal roof sealer creates a water repellent barrier and protects against re-growth of moss and algae.
The roof tile sealer is a high quality, clear, solvent free acrylic impregnating roof sealer for concrete, clay or slate tile roofs. Once applied, the roof sealer will alter the chemical structure of any roof tile and provide an excellent water repellent surface. The clear roof sealer will also greatly restrict the growth of algae, lichen and moss to the surface of the tile.
Roof Tile Sealer features:
- One coat application
- Suitable for slate, clay tiles and concrete tiles
- 1 x 25 litre will treat up to 125 m2 on concrete roof tiles & 200-250 m2 on clay & slate roof tiles
- Highly resistant to water, staining and organic growth
- Will not change appearance of roof tile
- Average coverage 5 m2 per litre
- Application by sprayer or brush
- Touch dry 2-3 hours
- Fully waterproof 24 hours
- Lifespan up to 10 years
- Solvent free impregnating sealer
Technical
PREPARATION:
- Before application of roof sealer make sure tiles or slates are totally clean, dry and free from moss or algae spores.
- Unless applied to a new roof, pressure washing and application of suitable biocide is essential.
APPLICATION: Apply roof sealer by hand held sprayer or brush, apply to saturation, it is recommended that after around 20 - 30 minutes a light second 'wet on wet' coat is applied. Not to be applied if there's a threat of rain or temperatures below 12°C. Apply to test area first, mix container before use.
Clean equipment with water immediately after use.
SHELF LIFE: Use as soon as possible after opening. Store away from sun and sources of heat. Avoid frost and low temperatures.
Can be stored for 12 months (in original sealed container).
Excellent sealing product! My 40 year old roof is now clean and waterproof!