Natural Stone Sealer - Ultimate Colour Enhancer for Sandstone (Sample, 1, 5 & 25 Litre) - NOT recommended for use on Limestone, Granite or Slate
Questions & Answers
There are currently no questions for this product.
Our Ultimate Colour Enhancing Sealer will transform natural Sandstone and Indian Sandstone patios, drives and floors. To avoid trapping in moisture, the sealer is fully breathable and once applied it will leave the surface with that 'just rained on' look, bringing to life the natural rich colours within the stone or slate. The Ulimate Colour Enhancer is a 'colour intensifier' for natural stone surface where the preferred look is when the surface has been rained in and the colours are darkened.
Step-by-Step Video Guide
The high quality unique non solvent formulation of this sealer for all types of Sandstone means it will not only dramatically improve the look of the stone, but provide long term protection as well.
By 'impregnating' into the surface and sealing from within, our Ultimate Colour Enhancing Sealer offers the very latest in protection for all types of Sandstone including Indian Sandstone. Solvent Free and safe to use around animals, children and vegetation, the sealer is easy to use with application by roller, sprayer or paint brush.
**Please note: This product is NOT recommended for use on Limestone, Granite or Slate**
If your Natural Stone has been recently 'pointed' using a 'sweep in' pointing compound, please contact us before application on 01268 722500
This is dependant on the porosity and nature of the Sandstone, but the average is 6 - 10m² per litre (always apply to a test area first).
DIRECTIONS FOR APPLICATION:
Important: Once fully cured Smartseal Ultimate Stone Enhancing Sealer is extremely difficult to remove, please follow application procedure correctly or call 01268 722500 for additional advice.
- Prior to applying, ensure the sandstone floor is totally clean and has been dry for at least 2 days.
- Apply in temperatures above 15°C. Application is recommended by sprayer, roller, paint brush or on very dense surfaces by sponge.
- Apply first coat evenly and generously. Allow to dry for about 1 - 2 hours. Remove any sealer residue after 15 - 20 minutes with a dry roller, cloth or dry sponge.
- Apply second coat with same process of removing any sealer residue after 15 - 20 minutes.
Make sure no rain is forecast for a least 8 hours after application. Do not attempt to clean using a pressure washer for at least 7 days after application.
Protect surrounding areas with masking tape, when applying the product, wear gloves and googles at all times. ALWAYS APPLY TO TEST AREA FIRST.
Avoid use of aggressive or abrasive cleaning products, failure to do so can reduce lifespan and effectiveness of the sealer.