pH Neutral Tile & Stone Cleaner (Available in 1 & 5 Litre) Effective, high quality cleaner for use on floor tiles, wall tiles and stone worktops
There are currently no reviews for this product.
Be the first to write a review.
Questions & Answers
There are currently no questions for this product.
pH Neutral Tile & Stone Cleaner
Smartseal pH Neutral Tile & Stone Cleaner is an effective, high quality cleaner for use on floor tiles, wall tiles and stone worktops. It can be used for the cleaning and maintenance of ceramic tiles, porcelain tiles, natural stone, plus glass, vinyl and stone worktops.
The Tile & Stone Cleaner is very easy to use and very effective at removing surface dirt, dust and grime leaving the surface of the tiles or stone looking clean, fresh and deoderised and free from germs. The biodegradable formulation is safe, non-corrosive and can be used on a wide variety of washable surfaces around the home or office.
We recommend using the pH Neutral Tile & Stone Cleaner for cleaning bathrooms, toilets or kitchens plus any other contaminated area that can be quickly wiped down to create a clean fresh, safe environment. It can clean stone tiles or worktops with ease and is safe to use around environments where food is being prepared.
- EFFECTIVE STONE CLEANER AND DISINFECTANT
- EASY TO USE AND APPLY
- BIODEGRADABLE & ECO-FRIENDLY
- NEUTRAL PH - NON CORROSIVE
- NON ACIDIC ALKALINE FORMULATION
- DOES NOT CONTAIN BLEACH
- VERY ECONOMICAL - HIGH CONCENTRATE
- SMELLS OF FRESH LAVENDER
1 Litre containers with childproof cap
5 Litre containers with childproof cap
The coverage will vary dependant on how much the tile and stone cleaner is diluted. It will also depend on the amount of surface contamination and general condition of the tiled surface.
DIRECTIONS FOR USE:
1) Dilute according to levels of surface dirt and contamination being removed. For best results, mix 1 - 8 capfuls to 5 litres of warm water.
2) Apply the cleaning solution to the soiled area leaving 1 - 2 minutes before mopping or wiping surface clean.
The pH Neutral Tile & Stone Cleaner does not leave streak marks and dries clear. There is no need to rinse it off the surface as this will dilute the effectiveness of the cleaner afterwards.
Important note: Always test the pH Neutral Tile & Stone Cleaner first in an inconspicuous area to see if it is suitable for its intended use.