Grout Magic - (237ml & 5ml sample sizes) - WHITE grout restorer & sealer to recolour grout.
There are currently no reviews for this product.
Be the first to write a review.
Questions & Answers
There are currently no questions for this product.
GROUT SEALER & GROUT RESTORER IN WHITE. CHANGE THE COLOUR OF WALL & FLOOR GROUTING
Grout Magic in WHITE from Smartseal is similar, but far superior to a white grout paint. It's the perfect solution to restoring WHITE wall and floor grout to make it look like new. The white grout paint is also a grout sealer that's used to restore the original colour and look of old grouting. If required, use Grout Magic to totally change the colour of wall or floor grout. It is the perfect grout restorer in white.
Before using Grout Magic in WHITE it's important to use the Grout Cleaner to thoroughly clean the grout. For best results we strongly recommend using the Grout Magic Pre-Treatment to ensure the grout joints are clean. If cement or grout residue is found on the tiles use the Grout Haze Remover prior to using the grout paint. We also recommend using the Mould and Mildew Remover to prevent any health issues from mould and mildew growth.
How does Grout Magic work?
Grout Magic is a powerful grout dye that is used to change the colour of WHITE tile grout. Available in 10 colours, it will renew and transform the look of old tile grout in WHITE. This superior grout whitener and grout sealer will absorb and penetrate deeply into existing grout on walls and floor tiles. It can give a totally new look to dramatically enhance the appearance of any wall or floor tile installation.
Once completely dry and fully cured, Grout Magic in WHITE will provide a durable protective seal to the grouting. The white grout paint will also help to reduce the growth and spread of mould and mildew on floor and wall tiles.
Also works as an effective grout stain remover
Not only will Grout Magic restore WHITE grouting it also acts as a grout sealer, forming a protective barrier against staining. It can be very difficult to remove grout stains that may have appeared over time. There is no need to accept the situation if wall or floor grouting is stained. Superior to a WHITE grout pen, Grout Magic can transform the look of the grouting very quickly and easily.
This white grout paint is easy to apply and no DIY skills are required, just common sense. The speedy and simple application process permanently seals and adds colour to make it look like new. The grout whitener is used frequently by professional tradesmen and homeowners.
- RE-COLOURS AND SEALS GROUT IN ONE GO
- MAKES OLD GROUT LOOK LIKE NEW
- HIDES GROUT STAINS
- VARIOUS COLOUR OPTIONS
- FOR INTERNAL USE ONLY
*10 GROUT COLOUR OPTIONS AVAILABLE
The grout dye and grout restorer in WHITE also comes in Black, Charcoal, Light Grey, Mid Grey, Light Brown, Dark Brown, Ivory, Sandstone & Limestone.
237 ml bottle
Coverage rate will vary from 3 - 15m² per 237ml bottle. Coverage rate of Grout Magic in WHITE will vary considerably depending on the width of the grouted joint as well as its density, texture and surface porosity.
- Ensure the area to be treated with Grout Magic in WHITE is clean and completely dry
- For best results and before application, use Grout Magic Pre-Treatment
- Shake the bottle vigourously before use.
- Apply in a thin coat over the grouted joint using a brush or sponge and apply evenly over the surface.
- Wipe off any excess that is on the tile surface straight away or within 60 minutes of application.
- To ensure best results two coats should be applied allowing 1-2 hours drying time for each coat.
- Do not wet the area for a further 48 hours.
NOTE: When using more than one bottle of the same colour of Grout Magic in WHITE, mix all the product together to ensure an even colour match and consistency of finish.
We do not recommend using Grout Magic in WHITE around porous surfaces i.e. unglazed tiles and porous natural stone surfaces as it could result in long term staining.
PLEASE NOTE: If application guidelines are not adhered to above and the product is applied too thickly onto the joint it could result in surface blistering, cracking and de-bonding of the product.