Free Delivery
On Orders Over £75*
#1 Top rated cleaning supplier
on trustpilot
UK Manufactured
since 2008
Product Reviews
By Steve Prescott

Arrived in good time, cleaner has not resolved the problem that I have (ingrained ageing), however, (I believe) this is not the fault of the product, I feel that I need the stronger solution!

By Steve Prescott

Arrived in good time, product has not resolved the problem that I have (ingrained ageing), however, (I believe) this is not the fault of the product, I feel that I need the stronger solution!

By Sion Walker

An easy to use cleaner that works well on our slate slab floor. You do not require much so it goes a long way whilst the perfume is pleasant and not overpowering in any way.

Wish to leave a review?
Write a review
Your Rating:
* All submissions will be checked by our administration team before appearing on the site. Please be patient as we will try and approve your comments as quickly as possible.

pH Neutral Tile & Stone Cleaner (1L & 5L)

Easy to use and very effective at removing surface dirt, dust and grime leaving the surface of the tiles or stone looking clean, fresh and deodorised and free from germs. With a scent of fresh lavender. For use on floor tiles, wall tiles & stone worktop.

£8.95
In Stock
Please select a size
Paypal
Visa
Visa Electron
MasterCard
Maestro
Product Description

pH Neutral Tile & Stone Cleaner

Smartseal pH Neutral Tile & Stone Cleaner is an effective, high quality cleaner for use on floor tiles, wall tiles and stone worktops. It can be used for the cleaning and maintenance of ceramic tiles, porcelain tiles, natural stone, plus glass, vinyl and stone worktops.

The Tile & Stone Cleaner is very easy to use and very effective at removing surface dirt, dust and grime leaving the surface of the tiles or stone looking clean, fresh and deoderised and free from germs. The biodegradable formulation is safe, non-corrosive and can be used on a wide variety of washable surfaces around the home or office.

We recommend using the pH Neutral Tile & Stone Cleaner for cleaning bathrooms, toilets or kitchens plus any other contaminated area that can be quickly wiped down to create a clean fresh, safe environment. It can clean stone tiles or worktops with ease and is safe to use around environments where food is being prepared.

PRODUCT FEATURES

  • EFFECTIVE STONE CLEANER AND DISINFECTANT
  • EASY TO USE AND APPLY
  • BIODEGRADABLE & ECO-FRIENDLY
  • NEUTRAL PH - NON CORROSIVE
  • NON ACIDIC ALKALINE FORMULATION
  • DOES NOT CONTAIN BLEACH
  • VERY ECONOMICAL - HIGH CONCENTRATE
  • SMELLS OF FRESH LAVENDER

 

Product FAQs

Q: Can this tile cleaner be used on Bert and May encaustic tiles? They are going to be positioned in a shower in a hotel room - would this cleaner be ok to use on a daily basis? And can it be used on marble in the same sort of environment? Naturally all surfaces will have been sealed Best wishes Libby Lord

Libby Lord

A: Yes, the pH Neutral Tile & Stone Cleaner has been formulated to be used on tiles without causing any harm.

Response from Nick
Ask Us A Question
Send us a question
Technical

SIZES AVAILABLE:

1 Litre containers with childproof cap
5 Litre containers with childproof cap

COVERAGE RATES:

The coverage will vary dependant on how much the tile and stone cleaner is diluted. It will also depend on the amount of surface contamination and general condition of the tiled surface.

DIRECTIONS FOR USE:

1) Dilute according to levels of surface dirt and contamination being removed. For best results, mix 1 - 8 capfuls to 5 litres of warm water.

2) Apply the cleaning solution to the soiled area leaving 1 - 2 minutes before mopping or wiping surface clean.

The pH Neutral Tile & Stone Cleaner does not leave streak marks and dries clear. There is no need to rinse it off the surface as this will dilute the effectiveness of the cleaner afterwards.

Important note: Always test the pH Neutral Tile & Stone Cleaner first in an inconspicuous area to see if it is suitable for its intended use.

Delivery

We provide a national delivery service for our block paving sealer, pattern imprinted concrete sealer, roof coatings and tarmac restorer on a standard 2 - 4 working day basis. Dependent on weight, this is normally done by pallet or parcel carrier.

If you need products delivered quicker, for a small additional charge, orders placed before 1.30pm can be delivered within 1 - 2 working days to most parts of the UK, although this is dependent on the courier service in your area and the product/s ordered. If you require this service, please check on area availability by calling 01268 722500.

Our commitment is to supply all orders as placed and we offer a comprehensive guarantee of quality. Providing a reliable delivery service to all our customers is most important to us and this is backed up by the many satisfied customer testimonials we have received over the years.

If you need an order delivered to a different address, left somewhere at your property without a signature or left with a neighbour, just let us know.

We also try to maintain 100% stocking levels of our products at all times, so an immediate despatch is virtually guaranteed.

Our product returns policy can be viewed by visiting our Terms and Conditions section.

*Free delivery on orders over £75 are subject to the delivery address location.

Share this product
 
COMPARISON BASKET COMPARE