Free Delivery
On Orders Over 75*
#1 Top rated cleaning supplier
on trustpilot
UK Manufactured
since 2008
Product Reviews
By Rod Tyrrell-PriceFROM Epping

An Indian sandstone area that has been laid for several years and become drab and more like cement slabs. After jet washing, the colours returned, most attractive as it was when new, but when dry, it was not as effective. I used Ultimate Enhancer sandstone sealer and the results are truly amazing. It now has the colours that showed when wet. Very pleased. I found the technical team extremely quick in response to my questions.

By Richard Hyde

Was sceptical to whether this sealer would actually provide the finish desired; however 3 coats on prepared sandstone give a lovely wet sheen which is easily cleaned. Longevity, time will tell. The result is however a little slippery when wet which can be an issue subject to type of footwear.

By Elaine HowiesonFROM Waterlooville

The wet look sealer is an excellent product, very easy to apply and the end result is exceptional. The colours in our sandstone paving are really enhanced and able to be seen in both wet and dry weather.

READ MORE REVIEWS
Wish to leave a review?
Write a review
Your Rating:
* All submissions will be checked by our administration team before appearing on the site. Please be patient as we will try and approve your comments as quickly as possible.

Natural Stone Sealer - WET LOOK

Protective 'wet look' Natural Stone Sealer. Not Suitable for Polished or Kandla Grey Sandstone (Sample + 3 sizes)

£25.95
In Stock
Please select a size
Paypal
Visa
Visa Electron
MasterCard
Maestro
Product Description

Smartseal Natural Stone Sealer WET LOOK is a water-based protective sealer that creates a durable, clear silk/satin finish. It can be used on internal and external surfaces made from sandstone**(see exceptions below), limestone, slate, terracotta, quarry and Victorian tiles, brick pavers and any textured stone or masonry surfaces.

Smartseal Natural Stone Sealer WET LOOK is rapid drying and very easy to apply. It will provide protection to the applied surface against oil and water-based stains. 

  • Ideal for Natural Stone**(see exceptions below) & Slate
  • Provides a Silk/Satin or "Wet-look" finish
  • Ok for rough & absorbent surfaces
  • Suitable for outdoor or indoor use

Please take a look at the other sealers for natural stone such as the DRY finish Natural Stone Sealer. For a colour enhancing sealer for natural stone that is not a gloss finish, you might want to consider the Natural Stone COLOUR ENHANCER.

*WE DO NOT RECOMMEND USING ON POLISHED STONE & CERAMIC GLAZED SURFACES, AS IT WON'T SOAK INTO THE SURFACE*

**Exceptions to Sandstone suitability: 

Please note this product is not suitable for Kandla Grey (mid and light grey) sandstone

 

Technical

COVERAGE RATIOS: 

Average 5-12 m per litre depending on the texture and porosity of the surface being sealed.

APPLICATION INSTRUCTIONS:

Due to the effects of Efflorescence and Natural Salts and Minerals, that can permeate through Natural Stone, it is recommended not to seal for a minimum 4 months after installation.

1. Apply in temperatures above 15C, but below 23 degrees ensuring the surface is completely dry, clean and free from debris. Apply only if no rain is forecast for at least 8 hours. For best cleaning results use Patio Clean Xtreme.

**If applied to a surface where a "sweep-in" pointing compound has been used with the last 6 months, the natural stone must be fully cleaned with Smartseal Residue Remover prior to sealant application.**

2. Apply the sealer thinly and evenly with a low pressure sprayer, roller, microfibre mop, paint brush or soft cloth. Try not to leave application marks or allow the product to 'pool' or 'puddle' on the surface immediately after application. In the event of over application please ensure all excess is removed within 45 minutes of applying.

3. Once applied, allow minimum 60 minutes drying time before applying the second coat. If possible, apply the product in the opposite direction to try to achieve an even finish. Multiple coats can be applied to achieve the desired finish.

Important Note:  Any areas nearby that are not being sealed should be protected with masking materials. If you are sealing over coloured grouts, carry out that a stain test before proceeding.

Product FAQs

Q: Name : Mike Cooper Email : mikecooperacs@aol.com Phone : 07710026075 Question : Hi, We have an Indian sandstone patio which is dull when dry. I want to give it a wet look to bring out the colour again. Which product and application method would be best to do this? Regards Mike

Mike Cooper

A: The natural stone colour enhancer will bring out the colours but the finish is not what we would regard as shiny. The wet look natural stone sealer gives a 'wet look' satin finish but offers less colour enhancement than the colour enhancer above. Samples are available to purchase so you can decide before buying what you need.

Response from Nick

Q: Hello, I have a Raj Green Indian Stone which are mixed of colours including grey colour too. My question is, if I will buy this product, it is gonna work even for the slabs which are grey? Thanks

Florina

A: It will work. The issue is that with some Kandla Grey Sandstone, Due to the mineral composition of Kandla Grey Sandstone, when a sealer is applied that contains polymers that 'enhance' the colour or provides a wet look finish, the appearance of the sandstone can be patchy. Hope that helps.

Response from George

Q: I have a limestone patio and was thinking about getting the black sealer but was worried it would make it too dark. Would you recommend I use the wet look product. Just want to make sure I buy the correct one as its too expensive to get wrong and I want something that will last and not just for 12 months. Thanks very much

Jonathan williams

A: The black limestone sealer, is actually a very dark grey (samples available for testing) It was introduced because non of the other sealers available provided a long enough lifespan from our perspective. Hope that helps.

Response from Alex
READ MORE QUESTIONS
Ask Us A Question
Send us a question
Delivery

We provide a national delivery service for our block paving sealer, pattern imprinted concrete sealer, roof coatings and tarmac restorer on a standard 2 - 4 working day basis. Dependent on weight, this is normally done by pallet or parcel carrier.

If you need products delivered quicker, for a small additional charge, orders placed before 1.30pm can be delivered within 1 - 2 working days to most parts of the UK, although this is dependent on the courier service in your area and the product/s ordered. If you require this service, please check on area availability by calling 01268 722500.

Our commitment is to supply all orders as placed and we offer a comprehensive guarantee of quality. Providing a reliable delivery service to all our customers is most important to us and this is backed up by the many satisfied customer testimonials we have received over the years.

If you need an order delivered to a different address, left somewhere at your property without a signature or left with a neighbour, just let us know.

We also try to maintain 100% stocking levels of our products at all times, so an immediate despatch is virtually guaranteed.

Our product returns policy can be viewed by visiting our Terms and Conditions section.

*Free delivery on orders over £75 are subject to the delivery address location.

Share this product
 
COMPARISON BASKET COMPARE