Natural Stone Impregnator (Solvent Free)
(1L & 5L) Superior stone impregnator that penetrates into & protects the surface of stone floors, walls or worktops. Gives enhanced protection from oil & wine stains. Solvent free stone sealer
Natural Stone Impregnator (Solvent Free)
Smartseal Solvent FREE Stone Impregnator is a hard wearing water-based stone and masonry impregnator for use on most* types of natural stone floors and worktops. It can be used on slate, granite, travertine and limestone floor tiles as well as flagstones. The solvent free stone sealer is also suitable for sealing interior terracotta and york stone floor tiles.
The stone impregnator penetrates into the surface of the stone floor or worktop and provides a protective barrier against oil stains and water-based stains.
Smartseal Stone Impregnator is suitable for internal and external use. It can be used on any porous textured stone or masonry.
STONE IMPREGNATOR BENEFITS
- STRONG STAIN RESISTANCE
- MATT FINISH
- EASY TO APPLY
- SUITABLE FOR INTERIOR & EXTERIOR USE
- ECO-FRIENDLY
- ODOURLESS
- PROTECTION FROM OIL & WATER STAINING
*WE DO NOT RECOMMEND USING THIS PRODUCT ON GLAZED CERAMIC TILES OR ANY OTHER HIGHLY POLISHED NON-POROUS SURFACES.
*WE DO NOT RECOMMEND USING THIS PRODUCT ON MARBLE. FOR MARBLE SURFACES, THE SOLVENT-BASED STONE IMPREGNATOR IS REQUIRED
Please note prior to application of the solvent free stone impregnator, make sure the surface area is clean and dry first. For areas of heavy contamination and ingrained grime use the Heavy Duty Tile & Stone Cleaner.
If the grouting needs cleaning use the Grout Cleaner to remove any dirt. To ensure the grout looks like new or if you want to change the grout colour, use Grout Magic.
SIZES AVAILABLE
1 Litre containers with childproof cap
5 Litre containers with childproof cap
COVERAGE RATES:
Up to 30m² per litre depending on porosity of the stone surface being sealed. After application make sure natural stone impregnator has absorbed into the stone
DIRECTIONS FOR USE:
1. Prior to application of the stone impregnator the surface of the natural stone floor or worktop must be completely clean and dry. Apply liberally and evenly using a sprayer, roller, natural fibre brush or sponge. Make sure any excess sealer is removed with a dry cloth or sponge after 25-30 minutes.
2. A second application should be applied around 45-60 minutes after the first application, repeating the same process. It takes around 24 hours before the product is completely dry and provide full protection from staining. It is important to ensure the stone surface is free from water and oil spills during the curing period as staining could occur.
Please Note: Any areas that are not being sealed should be masked off for protection. We advise that when using any coloured grouting compounds a stain test should be carried out before proceeding.
MAINTENANCE: Clean treated areas with Smartseal pH Neutral Tile & Stone Cleaner. Avoid using any harsh or abrasive cleaning agents which can negatively impact and deteriorate the surface of the treated stone floor or worktop.
If there areas of dirty grouting that need cleaning use Grout Cleaner. You can also use Grout Magic to restore or change the colour of grouting prior to using the stone impregnator.
Q: Hello, We have a stone fire place. I think sandstone surround and a York stone and mortar backing. It’s very dusty. Do you have anything you’d recommend to seal it to prevent dust without changing the appearance? Thanks, Ruth
A: We would suggest trying a sample of our natural stone dry sealer (available through our website) Hope that helps.
Q: Could this product be used in unglazed outdoor porcelain?
A: The Natural Stone Impregnator may work on unglazed porcelain tiles but we would always suggest carrying out a test partch first to determine suitability. We do have a porcelain sealer specifically formulated for sealing porcelain tiles on patios and floors
Q: Hi Guys. Could his be used on brick and terracotta floor?
A: The natural stone impregnator can be used on a on brick or terracotta floor?
We provide a national delivery service for our block paving sealer, pattern imprinted concrete sealer, roof coatings and tarmac restorer on a standard 2 - 4 working day basis. Dependent on weight, this is normally done by pallet or parcel carrier.
If you need products delivered quicker, for a small additional charge, orders placed before 1.30pm can be delivered within 1 - 2 working days to most parts of the UK, although this is dependent on the courier service in your area and the product/s ordered. If you require this service, please check on area availability by calling 01268 722500.
Our commitment is to supply all orders as placed and we offer a comprehensive guarantee of quality. Providing a reliable delivery service to all our customers is most important to us and this is backed up by the many satisfied customer testimonials we have received over the years.
If you need an order delivered to a different address, left somewhere at your property without a signature or left with a neighbour, just let us know.
We also try to maintain 100% stocking levels of our products at all times, so an immediate despatch is virtually guaranteed.
Our product returns policy can be viewed by visiting our Terms and Conditions section.
*Free delivery on orders over £75 are subject to the delivery address location.
The sealer is totally invisible when dry and does exactly what is says.
Excellent product. Easy to use. The natural stone sealer dries clear and matt. You cant tell there is any product on the stone once dry and when I tested with droplets of water they just formed beads of water and ran off. Very pleased with the result. Very quick delivery too.
Sealer does exactly what I wanted it to do ,blends in well with my york stone mantle and hearth.