0
Payment Methods Accepted
Buy with confidence
WATCH OUR QUICK WEBSITE OVERVIEW

sealers

Concrete

Concrete Sealers for Internal and External use

Smartseal supply a complete range of high quality concrete sealers for internal and external surfaces

Concrete floor sealers and concrete sealants protect all concrete surfaces from wear and tear. They also help keep internal surfaces hygenic, easy to clean, minimise dust and reduce maintenance.

For external products such as concrete driveways, patios, block paving, flagstones, roofs and imprinted concrete they enhance the look, reduce moss and algae, minimise staining and give long term protection.

All the Smartseal range of concrete sealer products are easy to apply and are available in 5 & 25 litre drums.

We also supply a full range of sealant application tools and cleaning materials, plus we offer step by step guides for trade and DIY customers

See concrete sealers for further information or for free advice call us on 0800 988 0348 or complete an online enquiry form


BLOCK PAVING SEALER

sealersSmartseal Premium block paving sealer is a clear, UV light stable solution designed to penetrate the surface of all forms of block paving and concrete pavers.

PURPOSE: Smartseal Premium block paving sealer combines sealing the surface of the paving whilst also improving the aesthetic appearance. The sealer also provides a barrier to contaminants thereby facilitating easy maintenance. This sealed surface will increase abrasion resistance and by solidifying the jointing sand will reduce sand erosion and weed infestation.

Special Properties -

  • Prevents sand loss from joints
  • Reduces efflorescence
  • Ultra-violet light and weather resistant
  • Inhibits the growth of moss and weeds
  • Enhances the colour of the block paving
  • Facilitates the easy removal of oil and other contaminants
  • Will not blister or peel


APPLICATION INSTRUCTIONS: Smartseal Premium block paving sealer can be applied using a  sprayer unit or roller. A rate of 2.5 m2 per litre is recommended for the 1st coat and 3.5 m2 2nd coat . A two-coat spray application is required to fully cover and fully penetrate the jointing sand. Smartseal Premium block paving sealer will be tack free within approx 2 hours at 20°C and foot traffic may be permitted after 4 hours. Vehicles should be kept off the sealed area for a minimum of 24 hours at 20°C. These times may be increased or reduced depending on the ambient temperature.

See concrete sealers for further information or for free advice call us on 0800 988 0348 or complete an online enquiry form


CONCRETE FLOOR SEALER
[img324-S-R]

Smartseal Concrete sealer is a clear, UV light stable solution designed to penetrate the surface of concrete floors and other concrete products.

PURPOSE: Smartseal Concrete sealer has been formulated to seal the surface and to improve the aesthetic appearance of industrial floors and other concrete surfaces. It also provides a barrier to contaminants to facilitate easy maintenance. Coloured pigment can also be added to the sealer in a range of colours. Once sealant has been applied, the surface will have increased abrasion resistance and be easy to keep clean.

Special Properties -

  • Reduces dust and surface particles
  • Damage resistant
  • Inhibits moisture penetration
  • Range of colours can be added (if required)
  • Enhances the finish
  • Facilitates the easy removal of contaminants
  • Will not blister or peel


APPLICATION INSTRUCTIONS: Smartseal Concrete sealer can be applied using a  sprayer unit, brush or roller, at a rate of approx 3m2 per litre. A two-coat spray application is sometimes advisable dependent on surface porosity.Smartseal Premium concrete sealer will be tack free within 2 hours at 20°C . Any internal vehicles should be kept off the sealed area for a minimum of 24 hours at 20°C. These times may be increased or reduced depending on the ambient temperature. Do not apply when the ground temperature is above 30°C or below 5°C. All equipment should be cleaned with Smartseal Xylene cleaner after use.

See concrete sealers for further information or for free advice call us on 0800 988 0348 or complete an online enquiry form


IMPRINTED CONCRETE SEALER
 

[img322-S-R]Smartseal XtraPlus imprinted concrete sealer is a pre-mixed, colourless blend of high-grade acrylic resin polymers and aromatic solvents.

PURPOSE: To impregnate Pattern Imprinted Concrete to give longer lifespan and better overall protection. A range of colour pigments can also be added to restore the original surface colour. Smartseal anti-slip additive can also be added for increased adhesion.

Special Properties -

  • Ultra-violet light and weather resistant
  • Inhibits the growth of moss and weeds
  • Enhances the colour of the paving
  • Will not blister or peel, hardens & seals concrete permanently
  • Special blend of polymers do not soften in hot temperatures nor become brittle in freezing conditions
  • High viscosity ensures full penetration into the dense surface matrix creating a true in-surface seal
  • 100% inter-coat adhesion
  • Tough, Durable and Hard Wearing
  • Oil & Grease resistant 


APPLICATION INSTRUCTIONS:
Brush or power wash slab to remove any dirt or debris. Smartseal Xtraplus can be applied with a sprayer unit or broom, keeping sprayer head moving to avoid pooling. The first application must be brushed into the surface and allowed to dry past tacky prior to applying the second coat. Avoid application in strong, direct sunlight - do not apply if rain is likely within 4 hours of application. Average coverage 3-5 sq meters per litre dependent on condition.

See concrete sealers for further information or for free advice call us on 0800 988 0348 or complete an online enquiry form


INDUSTRIAL SEALERS
 

[img323-S-R]Smartseal industrial Concrete sealer is a clear, UV light stable solution designed to penetrate the surface of  industrialconcrete floors and other concrete products.

PURPOSE: Smartseal Industrial Concrete sealer has been designed to seal the surface of the paving to improve the aesthetic appearance of industrial floors, garage floors and other concrete products. The concrete sealer will also provide a barrier to possible contaminants thereby facilitating easy maintenance. The sealer will increase abrasion resistance properties and reduce dust and surface particles.


Special Properties -

  • Reduces dust and surface particles
  • Damage resistant
  • Inhibits moisture
  • Enhances the finish
  • Facilitates the easy removal of oil and other contaminants
  • Will not blister or peel
  • Hygenic and easy to clean


APPLICATION INSTRUCTIONS: Smartseal Industrial Concrete sealer can be applied using a  sprayer unit, brush or roller, at a rate of approx 3m2 per litre. A two-coat or even three coat spray application is sometimes advisable dependent on porosity of surface. Smartseal Industrial concrete sealer will be tack free within 2 hours at 20°. Any internal vehicles should be kept off the sealed area for a minimum of 24 hours at 20°C. These times may be increased or reduced depending on the ambient temperature. Do not apply when the ground temperature is above 30°C or below 5°C. All application equipment should be cleaned with Smartseal Xylene fluid after use.

See concrete sealers for further information or for free advice call us on 0800 988 0348 or complete an online enquiry form


PATIO SEALERS
 [img325-S-R]

Smartseal patio sealer is a clear, UV light stable solution designed to penetrate the surface of patio slabs, flagstones, sandstone and most forms of porous surface

PURPOSE: Smartseal patio sealer has been designed to seal the surface of the paving to improve the aesthetic appearance of paving slabs and provide a waterproof barrier greatly reduce algae, moss and lichen growth. Application of the sealer will  reduce future maintenance and protect the pointed joints from erosion.

Special Properties -

  • Protects pointing
  • Reduces efflorescence
  • Ultra-violet light and weather resistant
  • Inhibits the growth of moss and weeds
  • Enhances the colour of the patio slabs
  • Facilitates the easy removal of oil and other contaminants
  • Will not blister or peel


APPLICATION INSTRUCTIONS: Ensure the patio is clean and dry with rain not forecast for at least 4 hours. Smartseal Patio sealer can be applied using a  sprayer unit or roller, at a rate of approx 4 m2 per litre. A two-coat spray application is reccomended. Smartseal Premium patio sealer will be tack free within 2 hours at 20°C and foot traffic may be permitted after 4 hours. These times may be increased or reduced depending on the ambient temperature.

See concrete sealers for further information or for free advice call us on 0800 988 0348 or complete an online enquiry form


ROOF SEALER
 

sealersSmartseal Roof sealer is a pre-mixed, colourless blend of high-grade acrylic resin polymers and aromatic solvents.

PURPOSE: To impregnate Concrete roof tiles to give long term protection and additional durability. Smartseal roof sealer penetrates deep into the tile and can be coloured to give a complete transformation of the existing roof. Two coats of roof sealer are applied to give maximum  resistance  to the weather and restrict future moss growth. Colour pigments can also be added to the roof sealer to restore original colour

Special properties -

  • Reduces moss growth
  • 25 colours available
  • Ultra-violet light and weather resistant
  • Enhances the visual impact of the roof
  • Will not blister or peel, hardens & seals concrete permanently
  • Special blend of polymers do not soften in hot temperatures nor become brittle in freezing conditions
  • High viscosity ensures full penetration into the dense surface matrix creating a true in-surface seal
  • 100% inter-coat adhesion
  • Tough, Durable and Hard Wearing
  • Minimises maintainence
     

APPLICATION INSTRUCTIONS: Ensure roof tiles are clean and dry prior to application of roof sealer. Apply Smartseal roof sealer with  a sprayer unit, brush or roller. The first application must be applied to the surface and allowed to dry past tacky prior to applying the second coat. Avoid application in strong, direct sunlight - do not apply if rain is likely within 4 hours of application.

APPROXIMATE COVERAGE: 3 sq. metres per litre

See concrete sealers for further information or for free advice call us on 0800 988 0348 or complete an online enquiry form

 
×